Cam Roller Linear Guides TEN Series

TEN Series Cam Roller Guides are the most economical linear guides of this style product. A cam roller slider assembly moves in a linear fashion within the “C” shaped rail. The rails are made of rolled carbon steel that is nitride hardened. The “Rollon-Nox” nitriding process results in black color corrosion resistant surface.

One or multiple slider assemblies can be mated to a rail for low friction movement of your payload. Rail lengths are available up to 4000 mm (157″).

Popular Sizes are TEN26 and TEN40 Series

Two piece rail linear guide assembly. These are typically install with the larger “C” shaped rail attached to structure and smaller cam roller slider assembly attached to moving drawer or platform structure.

Exploded view of this product showing the rail with a three cam roller bearing slider assembly.
TEN Product Technical Data
  • Cam Roller Bearing Design, 4 Point Contact with Rail
  • Carbon Steel, Nitride Hardened Raceways
  • Rollon-NOX Surface Treatment, Black Color
  • Rail Hole Spacing every 80 mm (3.15 inches)
  • Universal Mounting (i.e., left or right side)

Rail Side View Dimensional Data

The 26 and 40 series rails all have the same hole pitch or spacing (80 mm) along the length of the rail.

The first hole starts at 40 mm in from the end of the rail unless you specify otherwise.

Series 26 Products

End View Dimensional Data for Rail with Slider Assembly

Below are the TEN26 Slider Assemblies

Slider Part NumberAssembly DescriptionEnd SealsRadial Static Cap. (N)Radial Static Cap. (lbs)Axial Static Cap. (N)Axial Static Cap. (lbs)Net Wt. (lbs)
CEN26-923 Roller SliderNo1120252380850.22
CEN26-92T3 Roller SliderYes1120252380850.24
CEN26-1423 Roller SliderNo15203425401210.31
CEN26-92T3 Roller SliderYes1520342n/a1210.33

Rail Side View Dimensional Data

The 26 and 40 series rails all have the same hole pitch or spacing (80 mm) along the length of the rail.

The first hole starts at 40 mm in from the end of the rail unless you specify otherwise.

Check out the TEN26 Linear Cam Roller products in our Online Store

Series 40 Products

End View Dimensional Data for Rail with Slider Assembly

TEN40 Series Rail Products

Slider Part NumberAssembly DescriptionEnd SealsRadial Static Cap. (N)Radial Static Cap. (lbs)Axial Static Cap. (N)Axial Static Cap. (lbs)Net Wt. (lbs)
CEN40-1353 Roller SliderNo24005398201840.95
CEN40-135T3 Roller SliderYes24005398201840.99
CEN40-1953 Roller SliderNo324072811502591.32
CEN40-195T3 Roller SliderYes324072811502591.37

Check out the TEN40 Linear Cam Roller products in our Online Store

Not finding exactly what you are looking for?

Let our engineers help you with your project