Fully-Telescopic Narrow S-Beam Slides

The DS Series is a high capacity telescopic rail assembly where the stroke is approximately equal to the overall length of the rail assembly.   This series is constructed with cold drawn steel rails that are hardened to provide long life even in equipment with highly repetitive motion.  The bearing system consists of large diameter, caged balls.   The large balls and hardened steel raceways result in high load capacities and long product life..

Two piece rail linear guide assembly. These are typically install with the larger “C” shaped rail attached to structure and smaller rail attached to moving drawer or platform structure.

DSS Product Technical Data

  • Ball Based Design, 4 Point Contact
  • Carbon Steel, Induction Hardened Raceways
  • Electrolytic Zinc Plated Surface, Matte Silver Color
  • Rail Hole Spacing every 80 mm (3.15 inches)
  • Universal Mounting (i.e., left or right side)
  • Fully Telescoping Assembly (i.e.,100%)
  • Typically used in pairs (one on each side)
Download DSS Series Product Catalog

DSS28 Lubricant Requirements

Periodically applying a small amount of an NLGI #2 lithium-based grease with no solid additives such as MoS2 (molybdenum disulfide) along the rail ball track is recommended for quiet operation and long life.

Download DSS28 Series 3D Models

DSS Series Size 28 Telescopic Linear Guides

Available Options

SKUClosed LengthPrice 
DSS28-0290-296290 mmPrice on request
DSS28-0370-380370 mmPrice on request
DSS28-0450-464450 mmPrice on request
DSS28-0530-548530 mmPrice on request
DSS28-0610-630610 mmPrice on request
DSS28-0690-714690 mmPrice on request
DSS28-0770-798770 mmPrice on request
DSS28-0850-864850 mmPrice on request
DSS28-0930-950930 mmPrice on request
DSS28-1010-10341010 mmPrice on request
DSS28-1090-11181090 mmPrice on request
DSS28-1170-12021170 mmPrice on request
DSS28-1250-12661250 mmPrice on request
DSS28-1330-13501330 mmPrice on request
DSS28-1410-14341410 mmPrice on request
DSS28-1490-15181490 mmPrice on request

DSS43 Lubricant Requirements

Periodically applying a small amount of an NLGI #2 lithium-based grease with no solid additives such as MoS2 (molybdenum disulfide) along the rail ball track is recommended for quiet operation and long life.

Download DSS43 Series 3D Models

DSS Series Size 43 Telescopic Linear Guides

Available Options

SKUClosed LengthPrice 
DSS43-0530-556530 mmPrice on request
DSS43-0610-626610 mmPrice on request
DSS43-0690-726690 mmPrice on request
DSS43-0770-796770 mmPrice on request
DSS43-0850-866850 mmPrice on request
DSS43-0930-966930 mmPrice on request
DSS43-1010-10381010 mmPrice on request
DSS43-1090-11061090 mmPrice on request
DSS43-1170-12061170 mmPrice on request
DSS43-1250-12761250 mmPrice on request
DSS43-1330-13761330 mmPrice on request
DSS43-1410-14461410 mmPrice on request
DSS43-1490-15161490 mmPrice on request
DSS43-1570-16161570 mmPrice on request
DSS43-1650-16861650 mmPrice on request
DSS43-1730-17561730 mmPrice on request
DSS43-1810-18561810 mmPrice on request
DSS43-1890-19261890 mmPrice on request
DSS43-1970-20261970 mmPrice on request

Other Configurations

There are three versions available: DSS, DSB, and DSD. The DSS version that is a conventional single stroke system. The DSD version is a bidirectional or double stroke system. DSB version incorporates a locking system for the closed or retracted position.

The DSS Series Telescopic Linear Guides are also available in our Online Store