Plate Robot for largea area
Solutions for Med tech, Life Science Instrumentation, Semiconductor and Advanced Industrial applications.
While most of our robots use similar base structure, this robot is incorporates a fourth motion axis. In this particular case it was necessary to secure the unit and not allow anyone to inadvertently open it the during operation. Thus, a fourth motion axis was added to open and close the unit.
Another requirement was to have a large work area under the microplate holder for a liquid bath and ultrasonic transducer.
Travel or Stroke
| X-axis: | 125mm | (4.9in.) |
| Y-axis: | 15mm | (0.9in.) |
| Z-axis: | 55mm | (2.2in.) |
Footprint
| Side to Side: | 355mm | (14.0in.) |
| Front to Back: | 280mm | (11.0in.) |
| Height: | 120mm | (4.7in.) |
96 Well Microplate Dimensions
Our robot is used to position 96 well microplate in liquid bath for ultrasonication.
| Plate Length | -A- | 127.76 mm |
| Plate Length | -A- | 127.76 mm |
| Plate Width | -B- | 85.48 mm |
| Row Offset | -C- | 11.24 mm |
| Column Offset | -D- | 14.38 mm |
| Well Spacing | -E- | 9.00 mm |
Easy Microplate Loading and Unloading
A transparent door or window in the outer housing slides open to allowing easy access for loading and unloading the microplate.
Large Work Area Under Microplate Arm
Area under microplate is optimized for a liquid bath tank. For your application you may use this area for optics or other things.
Clearance under Microplate Arm
View shows clearance between bottom of microplate arm and base. For your application arm design can be changed.
Edge Grip Type Plate Holder
Plate holder grips microplate along the perimeter allowing full view of wells from the top or from the bottom.
