Curved Rail Linear System (CR40 Series)
For applications where you don’t want to move in a straight line, we offer our curved rail linear guide products.
The rails are machined from carbon steel blanks, then surface heat treated to provide a hard wear resistant surface. Additional post treatment results in a satin black color appearance. Standard catalog products available now are straight, 90-degree turn, and 180 degree turn rail sections. These are standard off-the-shelf items for those who wish to build their own systems. CR40 Series Carriages are designed with three cam roller wheels for smooth movement.
For many applications our standard catalog offering listed below will allow you to construct a complete system.
Below is a list of components required to make the example closed loop curved rail system in the sketch below.
Rail sections for any of the straight or turn pieces can be “butt” join together to allow smooth transition of the carriage as it moves along the track.
To assist in making the best possible alignment on your end during installation, it is advisable to purchase an alignment tool.
It is important to also note that the base upon which you install the rail sections should machined flat and of good structural integrity.
CR40 Series Rail Section Features
- Black Color Satin Finish Appearance
- Heat Treated Surface Hardened Rails
- Straight Rail Lengths up to 1220 mm (48 inches)
- 90 Degree Turn Sections with radius of 150 mm
- 180 Degree Turn Sections with radius as small as 100 mm
Carriage and Rail Assembly Photos
Carriage assembly is made of square shaped plate (12.7 mm thick) with three cam roller bearings attached. It is made of unhardened steel to allow for additional machining if customer wishes to add their own mounting holes.
Total height from bottom of rail to top of carriage is 28.7 mm.
Clearance between the bottom of the each cam roller to the bottom of the rail is approximately 1.3 mm.
Photos of the CR40-C3-NO-NB Carriage with and without a straight rail section.
Lubricant Requirements
Applying a small amount of an NLGI #2 lithium-based grease with no solid additives such as MoS2 (molybdenum disulfide) along the surface where the cam roller wheel contacts the rail is recommended for quiet operation and long life.
Alignment Tool
Part number is CR40-ALIGNTOOL
Price is $50.00 each
List of available Rail Section Options
You can check our rail sections in the online store or add the elements you need to the cart from here. If you can’t find the desired part please contact us.
180 Degree Sections options
Available Options
| Select Radius | Price | Quantity | |
|---|---|---|---|
| 100 mm (3.9") | $227.12 | ||
| 150 mm (5.9") | $259.56 | ||
| 200 mm (7.9") | $292.01 | ||
| 250 mm (9.8") | $324.45 | ||
| 300 mm (11.8") | $389.34 | ||
| 350 mm (13.8") | $454.23 |
90 Degree Sections options
Available Options
| Select Radius | Price | Quantity | |
|---|---|---|---|
| 150 mm (5.9") | $189.00 |
Straight Sections options
Available Options
| Straight Section Length | Price | Quantity | |
|---|---|---|---|
| 170 mm | $127.75 | ||
| 320 mm | $162.23 | ||
| 470 mm | $202.81 | ||
| 620 mm | $243.34 | ||
| 770 mm | $283.87 | ||
| 920 mm | $324.45 | ||
| 1070 mm | $365.03 | ||
| 1220 mm | $405.56 |
Carriage options
Available Options
| Select Type | Price | Quantity | |
|---|---|---|---|
| M6 Threaded Holes | $182.77 | ||
| No Holes | $182.77 |
CR40 Alignment Tool
-
CR40 Alignment Tool
$50.00
Not finding exactly what you are looking for? We customize curved rail systems to your specifications.
Let our engineers help you with your project
